Risks Of Fire In Business: How To Prevent Them?

How to prevent fire risks in order to reduce the vulnerability of your company and ensure the safety of personnel? Fires are among the major risks that threaten the viability of societies. Even if the number of direct victims (deaths, burns, poisoning by fumes) is relatively low, the economic risk is very high in most cases. 70% of companies and industries that are victims of a major fire disappear in the months that follow, due to the economic damage. How to anticipate such a scenario? Discover in this article the preventive safety measures to adopt to limit the risk of fire in the workplace.The fire risk assessment is part of the preliminary prevention steps. To prevent the risk of fire, it is necessary to start by identifying the possible origins as well as the potential sources of ignition.

For each fuel identified, it is important to identify its usefulness as well as its storage and use conditions. The fire risk assessment helps define the most effective fire protection measures. Thanks to it, you will have a better knowledge of the possible origins of inflammation in your premises. This way, you can take preventive measures that perfectly meet your fire safety needs. Install fire safety systems (SSI) The installation of fire safety systems (SSI) is an essential safety measure that should not be overlooked. Fire safety systems include all the equipment intended for the collection and processing of information for the automatic safety of premises in the event of ignition. Classified in five categories (A, B, C, D and E), they have been identified as mandatory in all countries of the European Union by the EN 54 standard.

Regularly Inspect Heaters

The SDI (fire detection system); The ISMS (fire safety system). The fire detection system (SDI) The SDI is a set of equipment enabling the outbreak of a fire to be detected as early as possible. It Oman Phone Number List is essentially composed of automatic fire detectors (DAI), action indicators (IA), manual call points (DM) and control and signaling equipment. DAIs (automatic fire detectors) come in several models, including the optical detector and the thermal detector. They ensure the detection of fire-related phenomena as well as the beginnings of ignition, thus making it possible to intervene as early as possible. Combined with DAIs, Action Indicators (AIs) are used to display detection externally to prompt personnel to action. As you have understood, each piece of SDI equipment plays a well-defined role in the prevention of fire risks.

Oman Phone Number List

However, to ensure better operation of the entire system, the installation must meet the requirements of standards NF S 61-936 and NF S 61-970. To do this, be sure to entrust the work to a qualified expert such as Gesip industrial safety . The fire safety system (SMSI) Composed of a CMSI (fire safety centralizer) and a DCT (terminal controlled device), the ISMS is one of the essential security measures you need to prevent the risk of fire. It is to manage fire safety  sending automatic or manual electrical orders. This system allows: To carry out a safe and rapid evacuation; To prevent the spread of flames; Simplify the deployment of relief. Store combustibles away from heat sources.  A fire starts only in the presence of three elements: an oxidizer, an ignition source and a fuel.

Check The Quality Of Electrical Installations

We are talking about the triangle of flame. To limit the risk of fire, these three elements from each other. Since the oxidizer is present in the circulating air, it is easier to control the fuel and the heat source. To do this, it is advisable to store fuels away from heat sources. However, the “flash point” of each fuel cleaners, paints, oils, etc. In order to guarantee optimum safety. Indeed, even being far from possible sources of ignition.  A fuel easily ignite due to the temperature of the enclosure . You must therefore arrange your fuels according to their physico-chemical properties. Check the quality of electrical installations Preventing the risk of fire in a company also involves checking electrical installations.

30% of workplace fires recorded in recent years in France. The result of an electrical fault. The electrical installation is, in fact, a real source of ignition. Virtually all electrical appliances and machines with electric motors generate heat, thus increasing the risk of ignition.  It is therefore necessary to regularly check the electrical installations and carry out.  Electrical maintenance work, according to international standards.  In order to considerably reduce the risk of ignition within your company. Regularly inspect heaters To risks of ignition in the workplace. it is also necessary to inspect the heating appliances.

Leave a comment

Your email address will not be published.